Bitumen/polyethylene blends: using m-LLDPEs to improve stability and viscoelastic properties

The stability and the rheological properties of blends of a 60/70 penetration-grade bitumen with conventional HDPEs and metallocene catalysed LLDPEs (m-LLDPE) are investigated. Considerably better stability results are obtained using m-LLDPEs instead of conventional polyethylenes, allowing one to avoid phase separation of the emulsion-like system during storage at high temperature. Thermodynamical interaction between bitumen and polyethylene is discarded as a cause of the observed difference, because the solubility parameter is practically the same for all the investigated polyethylenes. The result is explained on the basis of the lower melt elasticity of m-LLDPEs (attributed to their narrow molecular weight distribution), which facilitates the drop breakup during mixing process. The modification of bitumen with any of the m-LLDPEs considered in this work gives a new material with considerably improved viscoelastic properties.     

Bending of Composite Plates under Static and Dynamic Loading

The stationary bending of a two-dimensional elastic system of joined rectangular plates with different mechanical properties and boundary conditions is studied. A technique for solving the corresponding problem is proposed. It is based on approximate approaches in combination with a generalization of the force method. It is established that the static strain state of the system is essentially dependent on the difference between the elastic moduli of the constituent plates. It is also shown that with certain boundary conditions, the dependence of the first resonant frequency on the relative position of plates along the contact line is nonmonotonic__________Translated from Prikladnaya Mekhanika, Vol. 41, No. 1, pp. 77–84, January 2005.     

Numerical modeling of a turbulent flow behind a heated grid

A numerical model of the dynamics of turbulence and temperature fluctuations behind a heated grid located in a wind tunnel is constructed on the basis of closed Kármán-Howarth and Corrsin equations. Results calculated by this model are in reasonable agreement with available experimental data. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 50, No. 3, pp. 118–126, May–June, 2009.     

Review on Scale Dependent Characterization of the Microstructure of Porous Media

The paper discusses local porosity theory and its relation with other geometric characterization methods for porous media such as correlation functions and contact distributions. Special emphasis is placed on the charcterization of geometric observables through Hadwigers theorem in stochastic geometry. The four basic Minkowski functionals are introduced into local porosity theory, and for the first time a relationship is established between the Euler characteristic and the local percolation probabilities. Local porosity distributions and local percolation probabilities provide a scale dependent characterization of the microstructure of porous media that can be used in an effective medium approach to predict transport.     

STATISTIC MODELING OF THE CREEP BEHAVIOR OF METAL MATRIX COMPOSITES BASED ON FINITE ELEMENT ANALYSIS

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｃｒｅｅｐｂｅｈａｖｉｏｒｏｆｓｈｏｒｔｆｉｂｅｒｒｅｉｎｆｏｒｃｅＭｅｔａｌＭａｔｒｉｘＣｏｍｐｏｓｉｔｅｓ (ＭＭＣｓ)ｄｅｐｅｎｄｓｏｎｔｈｅｆｏｌｌｏｗｉｎｇｆａｃｔｏｒｓ,ｓｕｃｈａｓｔｈｅｃｒｅｅｐｐｒｏｐｅｒｔｙｏｆｔｈｅｍａｔｒｉｘ ,ｅｌａｓｔｉｃａｎｄｆｒａｃｔｕｒｅｓｐｒｏｐｅｒｔｉｅｓｏｆｔｈｅｆｉｂｅｒ,ｇｅｏｍｅｔｒｉｃｐａｒａｍｅｔｅｒｓｏｆｔｈｅｆｉｂｅｒｓ,ａｒｒａｎｇｅｍｅｎｔｏｆｔｈｅｆｉｂｅｒｓａｎｄｔｈｅｐｒｏｐｅｒｔｙｏｆｔｈｅｆ…     

Axisymmetric thermoelastoplastic stress-strain state of flexible laminated transversely isotropic shells

The paper presents a technique for numerical analysis of the elastoplastic stress-strain state of flexible laminated shells of revolution made of isotropic and transversely isotropic materials and subjected to axisymmetric loading and heating. The technique is based on the Kirchhoff-Love hypotheses for the whole laminate. The deformation of the isotropic materials is described using the theory of deformation along paths of small curvature. The deformation of the transversely isotropic material is described using the flow theory with isotropic hardening. The process of loading is divided into steps at each of which the stress-strain state is determined by the method of successive approximations. A numerical example is given __________ Translated from Prikladnaya Mekhanika, Vol. 42, No. 12, pp. 76–86, December, 2006.     

柔性扑翼的气动特性研究

以往扑翼的气动力计算研究都很少考虑扑翼的柔性,而在鸟的扑翼动作中,在外加气动力和鸟自身的扑动力作用下,扑翼的柔性变形相当大。本文在原有匀速刚性模型的基础上,提出考虑了扑翼扑动速率变化和形状变化的扑翼分析模型,使之更接近鸟翼柔性扑动真实情况。通过计算分析气动特性发现,控制适当的话,柔性变形能大大改善扑翼的气动性能。本文通过模拟鸟扑翼的柔性运动,计算了时柔性扑翼气动力以及平均升力系数和平均推力系数随着扑动角、倾斜角等参数变化的情况,从而从气动的角度解释了为什么鸟在不同的飞行阶段扑翼规律各不相同,并为柔性扑翼飞行器的设计提供了理论依据。     

Application of X-ray diffraction, micromagnetic and hole drilling methods for residual stress determination in a ball bearing steel ring

A basic understanding of distortion problems requires the analysis of a complete manufacturing process including an almost complete overview of residual stress states in the component during each production step. To reduce the measurement time in the future, three measurements methods (X-ray diffraction, micromagnetic and blind hole drilling methods) have been used to analyze residual stress states in machined AISI 52100 ball bearing rings. X-ray diffraction was used as a state-of-the-art method for machining induced residual stresses with pronounced gradients. The ring exhibited a complex residual stress state with high tensile residual stresses at the surface, a strong gradient in depth, and also showed some variation along the outer circumference due to a superimposition of machining induced residual stresses and effects from the clamping device process. Due to this surface state, micromagnetic signals depend on the analyzing frequency. A calibration of the signals was only possible with the X-ray diffraction data. The results of the three different measurement methods correlate reasonably well.     

Der Einfluß des Zusatzes von Hemicellulosen auf die Fließeigenschaften von Weizenmehlteig

The water adsorption capacity of a dough consisting of wheat flour was increased linearly by the addition of water-insoluble hemicelluloses (xylane, mannane etc.) extracted from beech-wood pulp using soda lye (a by-product of viscose fiber production). The investigation of this finding by viscosity measurements revealed two reasons for the higher water uptake: 1) a higher kneading resistance of the dough, and 2) a gel-regeneration of the kneaded dough during the dough-rest.

Herrn Prof. Dr. Josef Schurz zum 60. Geburtstag gewidmet.     

INCREMENTAL MICRO-MECHANICAL MODEL OF PLAIN WOVEN FABRIC

I. INTRODUCTION Previous research on woven fabric ignored the micro-weaving structures in fabric and modeled thewoven fabric as a ?exible orthotropic plate[1??3]. However, such a model is unable to predict certainbuckling phenomena of fabric commonly ob…